- Framebuilding Tools, Parts & Supplies
- >
- PMW Horizontal Dropouts with Hanger
PMW Horizontal Dropouts with Hanger
Paragon Machineworks US Made Dropouts:
This is a model of PMW dropout which has been discontinued.
These are identical to the PMW 2014 model dropout, but does not have a built in bottle opener (sorry, I'm not sure what the specific model # of these is).
These are a nifty choice if you are looking to build a frame with the ability to run both singlespeed and geared.
Here is PMW's Info:
Machined from 4130 steel plate, this is a classic rear-entry track style dropout with the relief on the outside. The chainstay and seatstay tabs are 70 degree included angle for medium to large frames. The tabs are 5 mm thick, the dropout face is 6.5 mm thick (+/- 0.5 mm), and it is chamfered 45 degrees x 0.5 mm around the outside profile. The derailleur hanger is on the right dropout. The center of the axle to the center of the derailleur bolt varies depending on the wheel position.
Item sold by pair."
Material: 4130 Steel
Weight: Roughly 138 grams
Skewer OD: 10mm